32 Amp 20m 240V Heavy Duty Industrial Extension Lead. Cable :6mm²R.

32 Amp Australian Standard 

Single Phase(240V)

3 Round Pins

Heavy Duty Industrial Extension Lead

Length: 20 m

The heavy-duty extension lead is suitable for indoor, outdoor and harsh environments.

The maximum length for general use is 50m

The maximum length for use with any equipment with a high starting current (i.e. electric motors) is 25m

Applications:

• Wet and oily environments
• Construction site leads
• Submersible Pumps 
• Flexible connections to motors, generators, compressors, e.g.
  • Drills & pumps
  • Saws & log splitters
  • Cranes & Hoists
  • Handheld drills
  • Grinders & welders
  • Agricultural equipment 
  •  Generators
  • Vacuums & floor grinders.

• Event and temporary cabling, e.g. 
  • fairgrounds 
  • sporting venues
  • Stage & theatre power.

The extension lead is suitable for dry, damp and wet environments; areas of stress caused by vibration or impact are resistant to abrasion, exposure to radiated heat and chemical contamination. Hazardous locations like engineering workshops.

Cable  Specifications:

Maximum Ambient temperature: 40°C

Maximum Continuous Length:  50m (with a 3% voltage drop)

Maximum current at 40°C: 42A

Cable CSA:6mm²

Max Voltage: 06/1kV

Insulation: Ethelyne-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 degrees C to +90 degrees C (mobile) -40 degrees c to +90 degrees C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail-order store; customer pickup is not available.