20A 15m 4 Pin Extension Lead. Australian IP56 Plug to 16A European Socket. With options of either a 4 or 5 Pin Extension Socket.

3 Phase  Extension Lead

20A Australian 4-Pin Plug to

4 or 5 Pin

16A European Socket.

Length: 15 m

Please Note: Some European machines are supplied with a 5-pin appliance inlet, but only use 4 wires. The neutral is not used. Select the 5-pin extension socket for these machines. If you are unsure of your requirements, purchase a 5-pin extension lead with a European standard extension socket.

For extended use outdoors or in environments with high ambient temperatures use the Heavy extension leads. 

(Intermittent use: Ambient temperature above 40°C below 45°C)

Applications: 

• For appliances with European plugs.

The extension lead is suitable for dry, damp and wet environments; areas of stress caused by vibration or impact they are resistant to abrasion, exposure to radiated heat and chemical contamination. Because of the black, flame-retardant sheath, it is suitable for areas subject to fire hazards and hazardous locations like engineering workshops.

It is recommended for applications where the lead is dragged behind a machine, e.g. floor polishers, floor grinders, and road saws; the heavy-duty leads are used.

Maximum Ambient temperature: 40°C

Maximum Continuous Length:  30m (with a 3% voltage drop)

Maximum current at 40°C: 20A

Cable  Specifications:

Cable CSA:2.5mm²

Max Voltage: 06/1kV

Insulation: Ethelyne-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 deg C to +90 deg C (mobile) -40 deg c to +90 Deg C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail-order store, and customer pickup is not available. 

EEC reserves the right to substitute the cable for cable of equal quality and specifications.