10 Amp 20m 3 Pin Extra Long Heavy Duty Single Phase 240V Industrial Extension Lead. Cable CSA:2.5mm²R.

10 Amp Australian Standard Single Phase(240V)

Extra Long Heavy Duty

Industrial Extension Lead

Length: 10m

The 10A 10m “extra long heavy duty” extension lead suits all environments.

The “extra long heavy duty” extension lead has a larger diameter cable and longer maximum allowable
length from the outlet to the appliance than the “heavy duty” lead.

The maximum length for general use is 60m

The maximum length for use with any equipment that has a high starting current is 40m

Applications:

• Wet and oily environments
• Construction site leads
• Submersible Pumps 
• Flexible connections to motors, generators, compressors, e.g.
  • Drills & pumps
  • Saws & log splitters
  • Cranes & Hoists
  • Handheld drills
  • Grinders & welders
  • Agricultural equipment 
  •  Generators
• Event and temporary cabling, e.g. 
  • fairgrounds 
  • sporting venues
  • Stage & theatre power.

The extension lead is suitable for dry, damp, and wet environments and stress areas caused by vibration or impact. It is resistant to abrasion, exposure to radiated heat, and chemical contamination. The black, flame-retardant rubber sheath suits areas in hazardous locations like engineering workshops.

Maximum Ambient temperature: 40°C

Maximum Continuous Length:  60m

Maximum current at 40°C: 10A

Cable  Specifications:

Cable CSA:2.5mm²

Max Voltage: 06/1kV

Insulation: Ethylene-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 degrees C to +90 degrees C (mobile) -40 degrees c to +90 degrees C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail-order store; customer pickup is not available