20 Amp Flat Pin Light Duty 240V Industrial Extension Lead. Cable:2.5mm². Priced From

20 Amp Australian Standard 

Single Phase(240V)

3 Round Pins

Light Duty 

Industrial Extension Lead

The 20A light-duty extension lead is suitable for indoor and outdoor use.
The light-duty extension leads are recommended for indoor or outdoor applications with an ambient temperature below 40°C.
For extended use outdoors or in environments with high ambient temperatures, use the heavy-duty
extension leads. 

The extension lead is suitable for dry, damp, and wet environments. Areas of stress caused by vibration or impact are resistant to abrasion, exposure to radiated heat, and chemical contamination. The black, flame-retardant rubber sheath suits hazardous locations like engineering workshops.

(Intermittent use: Ambient temperature above 40°C below 45°C)

The maximum length for general use is 20m

The maximum length for use with any equipment that has a high starting current (i.e. motors) is 10m

Applications:

• Wet and oily environments
• Construction site leads
• Submersible Pumps 
• Flexible connections to motors, generators, compressors, e.g.
  • Drills & pumps
  • Saws & log splitters
  • Cranes & Hoists
  • Handheld drills
  • Grinders & welders
  • Agricultural equipment 
  •  Generators
  • Vacuums & floor grinders.

• Event and temporary cabling, e.g. 
  • fairgrounds 
  • sporting venues
  • Stage & theatre power.

Cable  Specifications:

Cable CSA:2.5mm²

Max Voltage: 06/1kV

Insulation: Ethelyne-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 degrees C to +90 degrees C (mobile) -40 degrees c to +90 degrees C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail-order store; customer pickup is not available.