20 Amp 10m 4 Pin, 3 (Three) Phase 415V Light Industrial Ext Lead.

20 Amp Australian 3 (Three) Phase(415V)

Light Duty

Industrial Extension Lead

Cord Length: 10 m

Light Duty:

The “Light Duty” extension lead is suitable for indoor and short-duration outdoor use.

The “light” extension lead has the shortest maximum length allowed from the
outlet to the appliance.

These light-duty extension leads are recommended for indoor use or outdoor
applications where the ambient temperature is below 40°C.

For extended use outdoors or in environments with high ambient temperatures, use the Heavy
extension leads.

(Intermittent use: Ambient temperature above 40°C below 45°C)

The maximum length for general use is 30m

The maximum length for use with any equipment that has a high starting current is 10m

Applications:

• Wet and oily environments
• Construction site leads
• Flexible connections to motors, generators, compressors, e.g.
  • Drills & pumps
  • Saws & log splitters
  • Cranes & Hoists
  • Handheld drills
  • Grinders & welders
  • Agricultural equipment 
  •  Generators
  • 3 phase Vacuums & floor grinders. etc

• Event and temporary cabling, e.g. 
  • fairgrounds 
  • sporting venues
  • Stage & theatre power.

The extension lead is suitable for dry, damp and wet environments; areas of stress caused by vibration or impact are resistant to abrasion, exposure to radiated heat and chemical contamination. The black, flame-retardant sheath is suitable for areas subject to fire hazards and hazardous locations like engineering workshops. For applications where the lead is dragged behind a machine during normal operation, e.g., floor polishers, floor grinders, etc.

Maximum Ambient temperature: 40°C

Maximum Continuous Length:  30m

Maximum current at 40°C: 20A

Cable  Specifications:

Cable CSA:2.5mm²

Max Voltage: 06/1kV

Insulation: Ethelyne-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 degrees C to +90 degrees C (mobile) -40 degrees c to +90 degrees C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail-order store; customer pickup is not available