10 Amp 10m 4 Pin, 3 (Three) Phase 415V Light Industrial Ext Lead.

10 Amp Australian 3 (Three) Phase(415V)

Light Duty

Industrial Extension Lead

Length: 10 m

Light Duty:

The “Light Duty” extension lead is suitable for indoor and short-term outdoor use.

The “light” extension lead has the shortest maximum length allowed from the
outlet to the appliance.

These light-duty extension leads are recommended for indoor use or outdoor
applications where the ambient temperature is below 40°C.

For extended use outdoors or in environments with high ambient temperatures, use the Heavy
extension leads.

(Intermittent use: Ambient temperature above 40°C below 45°C)

The maximum length for general use is 40m

The maximum length for use with any equipment that has a high starting current is 15m

Applications:

• Wet and oily environments
• Construction site leads
• Flexible connections to motors, generators, compressors, e.g.
  • Drills & pumps
  • Saws & log splitters
  • Cranes & Hoists
  • Handheld drills
  • Grinders & welders
  • Agricultural equipment 
  •  Generators
  • 3 phase Vacuums & floor grinders. etc

• Event and temporary cabling, e.g. 
  • fairgrounds 
  • sporting venues
  • Stage & theatre power.

The extension lead is suitable for dry, damp, and wet environments, areas of stress caused by vibration or impact, and resistant to abrasion, exposure to radiated heat, and chemical contamination. Because of the black, flame-retardant sheath, the lead is suitable for areas subject to fire hazards and hazardous locations like engineering workshops.

The lead is ideal for applications where the lead is dragged behind a machine during regular operation, e.g., floor polishers, floor grinders, etc.

Maximum Ambient temperature: 40°C

Maximum Continuous Length:  40m

Maximum current at 40°C: 10A

Cable  Specifications:

Cable CSA:1.5mm²

Max Voltage: 06/1kV

Insulation: Ethelyne-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 degrees C to +90 degrees C (mobile) -40 degrees c to +90 degrees C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail-order store; customer pickup is not available