20A 25m 4 Pin Extension Lead. Australian IP56 Plug to 16A European Socket. With options of either a 4 or 5 Pin Extension Socket.

3 Phase  Extension Lead

20A Australian 4-Pin Plug to

4 or 5 Pin

16A European Socket.

Length: 25 m

Please Note: Some European machines are supplied with a 5-pin appliance inlet, but only use 4 wires. The neutral is not used. Select the 5-pin extension socket for these machines. If you are unsure of your requirements, purchase a 5-pin extension lead with a European standard extension socket.

For extended use outdoors or in environments with high ambient temperatures use the Heavy extension leads. 

(Intermittent use: Ambient temperature above 40°C below 45°C)

Applications: 

• For appliances with European plugs.

The extension lead is suitable for dry, damp and wet environments; areas of stress caused by vibration or impact they are resistant to abrasion, exposure to radiated heat and chemical contamination. Because of the black, flame retardant sheath, it is suitable for areas subject to fire hazard and hazardous locations like engineering workshops.

It is that recommended for applications where the lead are dragged behind a machine, e.g. floor polishers, floor grinders, road saws; the heavy duty leads used.

Maximum Ambient temperature: 40°C

Maximum Continuous Length:  30m (with a 3% voltage drop)

Maximum current at 40°C: 20A

Cable  Specifications:

Cable CSA:2.5mm²

Max Voltage: 06/1kV

Insulation: Ethelyne-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 deg C to +90 deg C (mobile) -40 deg c to +90 Deg C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail order store, and customer pickup is not available. 

EEC reserves the right to substitute the cable for cable of equal quality and specifications.