20 Amp 30m 240V Heavy Duty Industrial Extension Lead. Cable :4mm²R.

20 Amp Australian Standard 

Single Phase(240V)

3 Round Pins

Heavy Duty 

Industrial Extension Lead

Length: 30 m

The 20Amp heavy-duty extension lead is for extended use outdoors or in environments with higher ambient temperatures.

The extension lead is suitable for dry, damp, and wet environments. It is resistant to abrasion, exposure to radiated heat, chemical contamination, and stress areas caused by vibration or impact. The black, flame-retardant sheath suits hot work areas and hazardous locations like engineering workshops.

The maximum length for general use is 40m

The maximum length for use with any equipment that has a high starting current (i.e. electric motors) is 15m

Maximum Ambient temperature: 40°C

Maximum current at 40°C: 20A

Applications:

• Wet and oily environments
• Construction site leads
• Submersible Pumps 
• Flexible connections to motors, generators, compressors, e.g.
  • Drills & pumps
  • Saws & log splitters
  • Cranes & Hoists
  • Handheld drills
  • Grinders & welders
  • Agricultural equipment 
  •  Generators
  • Vacuums & floor grinders.

• Event and temporary cabling, e.g. 
  • fairgrounds 
  • sporting venues
  • Stage & theatre power.

Cable  Specifications:

Cable CSA:4mm²

Max Voltage: 06/1kV

Insulation: Ethelyne-propylene rubber (EPR) R-EP-90   90 deg C Conductor

Sheath Colour: Black - UV, sunlight and weather resistant.

Cable Temperature Range: -25 degrees C to +90 degrees C (mobile) -40 degrees c to +90 degrees C (fixed)

Maximum permissible short circuit temperature: 250 deg C for 1 Sec

EEC is an online mail-order store; customer pickup is not available.